Views: 21 Author: Site Editor Publish Time: 2022-11-21 Origin: Site
We often use two-component cartridges in sealing construction, but most people don't know how to use them. So what is the use of two-component cartridges? Let's take a look.
How to use the two-component cartridge?
What is the use value of the two-component cartridge?
What are the precautions for using two-component cartridges?
1. Take a flat cone and insert the rubber head of the sealant out of the small opening to ensure that it can flow out.
2. Use a screwdriver to insert the end of the sealant into a small hole, and then remove the cover.
3. Through the thread at the two-component cartridge, screw the glue clockwise to its plastic head.
4. Push the black fixing ring of the glue gun to the end of the glue gun, so that the sealant can be better inserted into the glue gun.
5. Press the small spring of the glue gun with one hand, and adjust the extension arm to the maximum with the other hand, so that the sealant can enter the glue gun.
6. From the end of the two-component cartridge, carefully insert it inside, taking care to keep the glue on the outside, so that the entire sealant is inserted.
7. Push the black fixing ring of the two-component cartridge to the head, so that the sealant can be fixed in the glue gun, so as to prevent it from being detached during use.
8. Press the small spring at the quiet end again, and push the extension arm of the glue gun forward with the other hand until it stops.
9. Press the switch of the glue gun, so that the sealant can flow out of the glue nozzle, but it must be pressed gently during the actual operation, so as to ensure the balance of the outflow.
The use of two-component cartridge for sealant construction is the last process of pool construction. In order to prevent damage to the sealant, the working surface of the pool must be protected after the sealant construction is completed, and other constructions on it are prohibited. At the same time, after the construction of the sealant is completed, the interior of the pool can be thoroughly cleaned and disinfected, and then it can be put into use. There are two kinds of common sealants: one is the sealant used for the wall, which is relatively thick and can be squeezed into the gap with a sealant gun after stirring evenly; the other is used for the bottom plate of the pool. Sealant, the sealant is relatively thin, and can be directly poured into the gap after stirring evenly.
Put the black retaining ring of the two-component cartridge on the head of the glue gun, the purpose of this is to make the sealant can be fixed inside the glue gun and prevent the sealant from the glue gun when the two-component cartridge is in use. Press and hold the small spring at the end of the glue gun again, and push the extension arm of the glue gun forward with the other hand until it stops. Press and hold the switch of the glue gun so that the sealant can flow out through the nozzle!
With our own proprietary equipment and methodologies, New Chang-an Plastic Enterprise Co.,Ltd. established quality control system, professional sales and customer service, we strive to provide high quality products and timely delivery to our customers.
